Snappy Drill-Countersink – Set of 4 – Centrotec Compatible
Drill the pilot hole and countersink or counterbore for screws in one easy step. Countersink to drive the head of the screw flush with or slightly below the surface. Easily control depth using an optional stop collar. Counterbore to drive the screw below the surface and plug the hole. The 82 countersink angle matches the angle on the head of most wood screws.
Festool Centrotec Chuck
Drill the pilot hole for your screw and bore the countersink at the same time with these excellent US-made bits. Countersink is 82 to fit most screws. Pilot drills are high speed steel.
To control the depth, we recommend a stop collar (not included). Snappy’s standard 3/8″ stop collar will do the job, but you get the best results with the Premium Rotating Depth Stop .
Snappy makes these bits to fit the high standards of
Festool’s Centrotec
quick change bit-holding system.
Includes
- 3/32 x 3/8 Countersink and drill for 6 hardwood and 8 softwood screws
- 7/64 x 3/8 Countersink and drill for 6 hardwood and 8 softwood screws
- 1/8 x 3/8 Countersink and drill for 8 hardwood and 10 softwood screws
- 9/64 x 3/8 Countersink and drill for 10 hardwood and 12 softwood screws
- 1/8″ hex wrench
- 2 x 3″ Square Drive Bit
Please Note: These bits can be used in a regular 3-jaw drill chuck, but they will not work in standard 1/4″ hex quick change chucks.
